Table of Contents
Advertisement
Clutch lever
Lever (1) disengages the clutch. It features a dial
adjuster (2) for lever distance from the handgrip on
handlebar. To adjust the distance between the lever
and the handgrip, rotate the knob (2) by the desired
number of clicks. Working from the front of the bike,
turn the knob (2) clockwise to move the lever away
from the handgrip and anticlockwise to move the
lever closer to the handgrip. When the clutch lever (1)
is operated, drive from the engine to the gearbox
and the drive wheel is disengaged. Using the clutch
properly is essential to smooth riding, especially
when moving OFF.
Attention
Set clutch lever when motorcycle is stopped.
Important
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
Note
The engine can be started with the side stand
down and the gearbox in neutral. If starting with a
gear engaged, pull in the clutch lever (in this case the
side stand must be up before engaging the gear).
96
2
1
Fig 78
Advertisement
Table of Contents
