Seat/Fuel Tank Adjustment 749S (Single-Seater) - Ducati 749S 2005 Owner's Manual

Seat/fuel tank adjustment 749S (single-seater)

The complete seat-fuel tank-tail guard assembly can be
adjusted on the single-seater version by sliding it forward
and rearward along the rear subframe (1) axis.
This provides a 20-mm adjustment range for the seat (2) to
meet rider's preferences.
Adjust as follows:
E
Release and remove the side screws (3) and remove the
side grab handles (4).
Slacken the screws (5) and move the seat-fuel tank
assembly forward or rearward.
The three holes (6) in the subframe (1) allow three different
positions.
Match the seat hole with the subframe hole that
determines the desired seat position.
When finished, torque the screws (5) to 10 Nm.
A stud (7) fixed in the centre of the tail guard slides in a
slot (8) fitted with an "H" rubber (9).
Position the side grab handles and tighten the side
screws (3) to 10 Nm.
36
2
6 1
fig. 30
7
9
8
5
4
3
fig. 31