Delco Charging System Specifications; Output Voltage Specifications - Jeep J-10 Series 1982 Technical & Service Manual

CHARGING SYSTEM 1E-15
SPECIFICATIONS
Delco Charging System Specifications
Alternator
Manufacturer Delco
Standard (4, 6 and 8cyl.) 42 amp
Optional (4, 6and8cyl.) 63 amp
Optional (6and8cyl.) 70 amp
Optional (Police) 85 amp
Field Current 4.0 to 5.0 amps at 80° (27X1
Rotation (Viewing Drive End) Clockwise
Pulley Size 2.43 in. (6.18 cm)
Belt Tension
New Belt (V-Belt) Set to 125-155 pounds-force (559-689 newtons)
Used Belt (V-Belt) . . Recheck 90-115 pounds-force (400-512 newtons)
New Belt (Serpentine) 180-200 pounds-force (800-890 newtons)
Used Belt (Serpentine) 140-160 pounds-force (623-712 newtons)
Regulator
Manufacturer Delco
Model 1116387
Type Solid State
Adjustment None
70138B
Output Voltage Specifications
Ambient Temperature
in Degrees Fahrenheit (C)
Acceptable
Voltage Range
0-50 (-18 to 10)
50-100 (10 to 38)
100-150 (38 to 66)
150-200 (66to 93)
14.3-15.3
13.9-14.9
13.4-14.4
13.0-14.1
80807
Torque Specifications
Service Set-To Torques should be used when assembling components. Service In-Use Recheck Torques should be used for checking a pre-tightened item.
Service
Set-To
Torque
Alternator Adjusting Bolt 18
Alternator Mounting Strap Bolt 28
Alternator Pivot Bolt or Nut 28
Pulley Nut 50
All Torque values given in newton-meters and foot-pounds with dry fits unless otherwise specified.
USA (ft-lbs)
Metric (N •m)
Service Service
ce In-Use Service In-Use
b Recheck Set-To Recheck
jo Torque Torque
Torque
15-20
24
20-27
23-30
38
31-41
20-35
38 27-47
45-55 68
58-78
J-21008
CONTINUITY
LIGHT
^ ^
Tools
70271
AMA 21-317
CIRCUIT TESTER
70139