Table of Contents
Advertisement
MINIMUM GROUND CLEARANCE/TYPICAL ANGLES
217
J0A0667C
"Minimum ground clearance" (reference A)
The clearance value is measured next to the lower edge of the differential. This value also defines those for the "Approach angle" the
"Departure angle" and the "Breakover angle".
Dimensions are expressed in mm and refer to the car equipped with its original tyres.
Front wheel drive (FWD) versions: 171 mm
Four-wheel drive (4WD) versions: 201 mm
Trailhawk versions with four wheel drive (4WD LOW): 225 mm
"Ap p roach angle" (reference B)
The approach angle is determined by the horizontal line of the road surface and by the tangent line passing between the front wheel
and the most projecting low point of the car.
The wider the angle, the lower the chance to hit an obstacle with the body or chassis, climbing a steep slope or overcoming an
obstacle.
Front wheel drive (FWD) versions: 17.9°
253
Advertisement
Table of Contents
