Generator - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

3. Generator

1) Disconnect battery ground cable.

2) Disconnect connector and terminal from gen-

3) Remove V-belt cover.

4) Remove front side V-belt.

<Ref. to ME-45, FRONT SIDE BELT, REMOVAL,

5) Remove bolts which install generator onto

B: INSTALLATION

Install in the reverse order of removal.

Check and adjust V-belt tension. <Ref. to ME-46

INSPECTION, V-belt.>

C: DISASSEMBLY

1) Heat the portion (A) of rear cover to 50°C

(122°F) with heater drier.

Starting/Charging Systems

Table of Contents