Fuel Delivery, Return And Evaporation Lines - Subaru IMPREZA 2001 Service Manual

FUEL DELIVERY, RETURN AND EVAPORATION LINES

FUEL INJECTION (FUEL SYSTEMS)
24.Fuel Delivery, Return and
Evaporation Lines
A: REMOVAL
1) Set vehicle on the lift.
2) Release fuel pressure. <Ref. to FU(SOHCw/
oOBD)-47, RELEASING OF FUEL PRESSURE,
OPERATION, Fuel.>
6) In engine compartment, detach fuel delivery hos-
es, return hoses and evaporation hose.
(1) Fuel delivery hose
(2) Return hose
(3) Evaporation hose
7) Lift-up the vehicle.
3) Open fuel filler flap lid and remove fuel filler cap.
4) Remove floor mat. <Ref. to EI-37, REMOVAL,
Floor Mat.>
5) Remove fuel delivery pipes and hoses, fuel re-
turn pipes and hoses, evaporation pipes and hos-
es.
8) Disconnect two-way valve hose (A) from two-
way valve and disconnect canister hose (B) from
canister.
S2M0500F
9) Separate quick connector on fuel delivery and
return line.
(1) Clean pipe and connector, if they are cov-
ered with dust.
(2) Hold connector (A) and push retainer (B)
down.
(3) Pull out connector (A) from retainer (B).
FU(SOHCw/oOBD)-60
(B)
(A)
EN0564
EN0840