Volkswagen Passat 1995 Official Factory Repair Manual page 919

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
Code Control Module
Input code number XXXXX
037 906 259B MOTRONIC M5.9 AT V02
Coding 0006
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
HELP
(0-32000)
WSC xxxxx
HELP
Indicated on display
- Input appropriate code number for
this vehicle and press -Q- button to
confirm input.
Coding
00006 Passat with manual
transmission
00007 Passat with automatic
transmission
The VAG 1551 scan tool display will
show the control module identification,
e.g.:
- Press
button.
Indicated on display
- Press buttons -0- and -6- to select
"End Output" function 06 and press -
Q- button to confirm input.
Note:
The code entered and shown on the
display will not be used by the Engine
Control Module (ECM) until the ignition
has been switched off once. An
incorrect coding leads to:
Engine running malfunctions
Increased fuel consumption
Increased emissions
Malfunctions stored in Diagnostic
Trouble Code (DTC) memory which
are not actually present
Reduced transmission life
Page 5 of 80
01-11
Application
6/12/2004