Replacing The Front Unit Assembly Fru - GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual

12.4.6 Replacing the Front Unit Assembly FRU

Disassemble first:
a. 12.3.3. Detaching the Frame Side Housing Decorations
b. 12.3.4. Detaching the Top Cover
c. 12.4.1. Detaching the Front Unit Assembly
d. 12.4.3. Replacing the User Interface Board
e. 12.4.4. Replacing the Trim Knob and Trim Knob Encoder
f. 12.4.5. Replacing the Keypad
Disassembly and reassembly
1. If WLAN is installed. Detach carefully the
WLAN antennas from the Front Unit.
NOTE: Be careful not to bend the antenna boards
or damage the antenna cables.
Reassemble in reverse order.
NOTE: When replacing the Front Unit Assembly,
always replace the Keypad panel and keypad
with new ones, as they may damage when
detached.
NOTE: The antennas are attached to the Front
Unit with double-sided tape. New tape is included
in the Front Unit Assembly FRU. Use this tape
when reattaching the antenna boards to the
Front Unit.
NOTE: Place the antenna cables carefully as
shown in the pictures on 12.4.7.
203
2081903-001