GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 155

Hide thumbs Also See for CARESCAPE Monitor B650:
Table of Contents

Advertisement

Log
Contents
WLAN Status
WLAN radio
WLAN client IP Address
Antenna diversity mode
Center frequency (i.e., the current actual center frequency, which is
associated with the operating channel number used, e.g in the 2.4
GHz band on channel 6, the displayed frequency should be 2.437
GHz.)
RTS Threshold
Fragmentation Threshold
Quality of Service:
-
Applied QoS standard (i.e., None or WMM)
-
QoS parameters (CWmin, CWmax, AIFS and TXOP) for each QoS
access category (Voice, Video, Best Effort, Background)
The DSCP settings for network traffic types (Realtime Clinical Traffic,
Non-Realtime Clinical Traffic, Non-Realtime Non-Clinical Traffic)
SSID (i.e., Service Set Identifier / network name)
Security status:
-
Authentication method (i.e., open)
-
Confidentiality method (i.e., None, WEP-64, WEP-128, WPA-PSK
(TKIP), WPA2-PSK (AES-CCMP))
-
Used Key Index (if WEP-64 or WEP-128 is used)
RF readings from the WLAN radio:
-
Operating channel
-
Transmit rate in Mbps
-
Transmit power in mW
-
Signal Level (RSSI) in terms of dBm. The minimum RSSI should be
-75dBm or greater to maintain application performance.
-
Noise floor in dBm
-
Signal to Noise Ratio (SNR) in dB
Troubleshooting
147
2081903-001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents