GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 81

WLAN Client Configuration
Item
Frequency Band
RTS Threshold
Fragmentation
Threshold
QoS Configuration
Description
Select the frequency band to be
used with the WLAN radio:
- 2.4 GHzPass
- 5.1 GHz
- All Band (2.4 GHz & 5.1 GHz)
Configure the RTS Threshold value.
Configure the Fragmentation
Threshold value.
Select the Quality of Service (QoS)
standard used in the wireless
infrastructure to prioritize the
network traffic:
- None (no QoS in use)
- WMM (WLAN Multimedia in use)
Comments
The WLAN radio is capable to communicate on
the following frequency bands, protocols and
data rates:
- 2.4 GHz, IEEE 802.11b, up to 11 Mbps.
- 2.4 GHz, IEEE 802.11g, up to 54 Mbps.
- 5.1 GHz, IEEE 802.11a, up to 54 Mbps.
NOTE: In the S/5 Wireless Network, the
frequency band is fixed to 2.4 GHz and it
supports 802.11b protocol only.
Use the default RTS Threshold value, unless
otherwise specified in the wireless network
design.
A valid RTS Threshold is a numeric value within
the range of 0 to 2347.
NOTE: This option is not configurable in the S/5
Wireless Network.
Fragmentation Threshold specifies the
maximum frame size a wireless device can
transmit without fragmenting the frame.
A valid Fragmentation Threshold is a numeric
value within the range of 256 to 2346.
Use the default Fragmentation Threshold value,
unless otherwise specified in the wireless
network design.
NOTE: This option is not configurable in the S/5
Wireless Network.
Select QoS configuration setting as specified in
the wireless network design.
NOTE: This option is not configurable in S/5
Wireless Network.
Configuration
73
2081903-001