Webmin Configuration Modules - GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual

CARESCAPE Monitor B650

4.6 Webmin configuration modules

The Webmin service interface includes the following configuration modules. Select Help for
additional information related to each Webmin module.
Webmin module
Admit Settings
Host Asset Settings
Language
Licenses
MUSE/12SL
Modules
46
2081903-001
Use the module
to configure Patient ID Prefix and barcode settings.
to enter a host asset number and to view the host serial
number.
to select the language used in clinical user interface and
to select the keyboard locale setting for the
alphanumeric keyboard and the barcode reader.
to enable and activate a software package, to enable
and activate software features and to upload and
activate a license file.
to configure the host for sending and viewing 12SL
information.
to configure some acquisition module specific settings
after corrective maintenance, or for administrative
purposes. These settings are saved to the permanent
memory of the related acquisition module and the
settings travel with the module from one patient monitor
to another.
Refer to the Module Frames and Modules Technical
Manual for detailed information how to change these
settings.