Selecting And Configuring Carescape Network - GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual

CARESCAPE Monitor B650
3. Enter the new hostname in the Change Value to column.
NOTE: The hostname is a unique, 4 to 32 character long identifier of a patient monitor in
the network. Use alphanumeric characters A-Z, a-z, 0-9. The hostname may include also
characters "-" and "_", but it can't start or end with these characters.
4. Select Save.
The hostname configuration will take effect immediately.

7.2.2 Selecting and configuring CARESCAPE Network

To select CARESCAPE Network MC for the real-time network infrastructure:
1. Log in to Webmin.
2. Select Configuration > Network > Wired Interfaces.
The current network configuration is shown in the Present Configuration table.
3. Below Select Network Type in the Network Configuration window, select the applicable
network type: CARESCAPE Network.
4. Select Next to proceed on network configuration.
NOTE: When CARESCAPE Network is selected, the S/5 Network is disabled.
The patient monitor may be configured to the MC Network, or IX Network, or both.
Network connection(s)
MC Network only
IX Network only
Both MC and IX Network
NOTE: The following IP addresses are reserved and not valid: 172.16.254.254, 172.16.255.255,
172.18.254.254, 172.18.255.255, 192.168.250.x, 192.168.252.x, 192.168.253.x, 192.168.254.1
and 192.168.254.2.
5. In the Network Configuration window below MC Network.
a.
b.
c.
6. If separate MC Network segments are connected together by a router, configure the
router information below the MC static route:
a.
b.
c.
7. Below IX Network, select DHCP or Manual Configuration.
If Manual Configuration is selected, enter the following information in the entry fields:
a.
b.
c.
d.
8. Select the applicable Speed & Duplex option.
9. Select Save.
70
2081903-001
Enter a Static IP address.
Enter a valid Netmask level.
Select the applicable Speed & Duplex option.
Enter Destination Address.
Enter Destination Netmask.
Enter an MC Gateway.
Enter a Static IP address.
Enter a valid Netmask level.
Enter a valid Default Gateway.
Enter valid DNS Server addresses if applicable.
Steps to be performed
5, (6) and 9
7, 8 and 9
5, (6), 7, 8 and 9