GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 43

The following symbols appear in the software user interface
With software version 2 host build 2.0.7 or earlier:
General warning sign. Displays when the priority setting for HR/PR
high/low, or SpO2 low has been set to low.
Displays in the:
•
Lower part of the parameter menu's Alarms tab
•
Priority column of the selected alarm in the Alarm Setup > Alarm
Priorities.
With software version 2 host build 2.0.8 or later:
General warning sign. Displays when the priority setting for Tachy/Brady
PR high/low or HR/PR high/low, or SpO2 low has been set to low, or when
the low priority volume is set to 0.
Displays in the:
•
Upper left corner of the screen
•
Lower part of the parameter menu's Alarms tab
•
Priority column of the selected alarm in the Alarm Setup > Alarm
Priorities.
Reminder volume icon. Adjust the volume of the tone that sounds every
two minutes when audio alarms are turned off.
Touch volume icon. Adjust the volume of the tone that sounds when a
user touches a touchscreen display.
Home icon. Close all menus/applications displayed on the patient
monitor.
Locking setting indicator. Indicates this setting is locked and cannot be
adjusted.
Network connection indicator. Indicates the patient monitor is connected
to the Local Area Network (LAN).
Network connection indicator. Indicates the monitor is connected to the
Wireless Local Area Network (WLAN).
Network (WLAN) signal strength. The number of segments corresponds to
the signal strength: four segments indicate strong signal, one segment
weak signal.
System overview
35
2081903-001