Transferring Settings From One Patient Monitor To Other Patient Monitors - GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual

CARESCAPE Monitor B650
7.16 Transferring settings from one patient monitor to
other patient monitors
You can transfer platform and/or clinical settings from one patient monitor to another, take
backup copies of the settings to an external device and restore the settings from an external
device.
1. Complete the platform and/or clinical configuration in one patient monitor.
2. Save the completed platform and/or clinical configuration settings to an external device
(section
3. Load the saved platform and/or clinical configuration settings from an external device to
the destination patient monitors (section
4. Activate the loaded platform and/or clinical configuration settings in the destination
patient monitors (section
5. Some platform settings can't be transferred from one patient monitor to another. See
section
manually in the destination patient monitor following the instructions in sections
Configuring the
number
NOTE: Clinical settings are software package and profile specific. For example, you can transfer
clinical settings from a patient monitor with OR and PACU software only to other patient
monitors with OR and/or PACU software, not to patient monitors with ICU, NICU and ED
software.
7.16.1 Saving settings
NOTE: The patient monitor must not be configured to receive any alarm notifications from
other monitors when the settings are saved.
Before saving the settings to a patient monitor that is connected to the MC or S/5 Network,
make sure that the monitor is not receiving any alarm notifications from other monitors:
1. Select Data&Pages > Other Patients > Receive Alarms.
2. Check that Change All Notifications is set to Off.
Save the completed platform and/or clinical settings to a service PC or USB flash drive.
1. Log in to Webmin.
2. Select Configuration > Settings.
3. In the Sub-Modules for Settings menu, select Save.
4. In the Save Settings window, select the radio button next to the type of settings you want
to save.
5. Select Save.
6. According to your Webmin access:
a. If you are using Webmin on a service PC, you can save the settings file to any mass
storage device connected to the service PC:
−
−
NOTE: You may change the default filename, but do not change the file extension.
b. If you are using Webmin locally through the integrated browser, you can save the settings
file to a USB flash drive that is connected to one of the patient monitor's USB ports:
90
2081903-001
7.16.1 Saving settings).
7.16.3 Activating
7.16.3 Activating settings
network, 7.4 Setting unit and bed
and 7.17 License management.
In the File Download dialog box, select Save.
In the Save as dialog box, select the destination drive and folder and select Save.
7.16.2 Loading settings).
settings).
for details. Configure these unaffected settings
name, 7.12 Setting the host asset
7.2