12.2.6 Detaching the Module Frame assembly
Disassemble first:
a.
12.2.1. Detaching the module frame front cover
b.
12.2.3. Detaching the PDM docking mechanism
c.
12.2.4. Detaching the Module Frame cover unit
d.
12.2.5. Detaching the E-module Interface
•
Reassemble in reverse order.
Disassembly and reassembly
Board: steps 1 and 2 only.
1. Remove the T10 screw. Torque [0.6 Nm]
2. Release the snap behind the flex cable.
Lift the flap with a flat blade screwdriver.
3. Pull the Module frame Assembly to detach it
from the Module Frame wall.
NOTE: When reassembling, check that the
connector is intact.
183
2081903-001