GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 55

Webmin module
National Requirements
Network
Passwords
Power frequency
Printers
Remote Service
Restart
Settings
Software Management
Time
Unit and bed name
WLAN
Use the module
to activate France specific defaults for the ECG HR
adjustment range and the reminder beep behavior.
to select and configure the real-time network as the MC
Network (CARESCAPE Network) or S/5 Network. It also
allows the user to configure the IX Network settings.
to change the passwords for the biomed and clinical
users.
to set the power line frequency.
to configure the patient monitor to print to up to 12 laser
printers connected on the IX Network. There are
sub-modules for installing a printer, deleting a printer
and for printing a test page.
to configure and control the Insite with Exc remote
service tool.
to shutdown and restart the patient monitor
automatically via Webmin.
NOTE: The patient must be discharged in order to enable
monitor restart via Webmin.
to transfer platform and/or clinical settings from one
patient monitor to another, to take backup copies of the
settings to an external device and to restore the settings
from an external device.
to update patient monitor and parameter module
software.
to set the date and time settings.
to configure the care unit name and bed name for
patient monitors that are configured to connect to the
MC Network.
to configure the WLAN client settings for the MC
Network or S/5 Network.
Using Webmin service interface
2081903-001
47