GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 100

CARESCAPE Monitor B650
•
•
•
NOTE: Activation of the cloned clinical or platform settings will not effect the following
settings in the target patient monitor:
−
−
−
−
Remember to configure the unaffected settings manually in the target patient monitor.
NOTE: Check and manually modify the following WLAN settings after activating them in
the destination monitor:
−
−
−
−
•
•
NOTE: Activation of the factory defaults and US factory defaults will leave the following
settings in the target patient monitor unaffected:
- Host Asset Settings
- Licenses
5. In the Setting Activation, select whether you want the new settings to take effect
immediately or after the next case end / discharge:
92
2081903-001
Select Cloned settings (clinical and platform) to activate both the clinical and
platform settings.
Select Cloned clinical settings to activate only loaded clinical settings.
Select Cloned platform settings to activate only loaded platform settings.
Network
Unit and Bed Name
Host Asset Settings
Licenses
RTS Threshold
Fragmentation Threshold
TXOP for Best Effort
TXOP for Background
Select Factory default settings to restore all platform and clinical settings back to
the factory defaults.
Select US default clinical settings to restore all clinical and platform settings back
to the US specific factory defaults.