Network Infrastructure - GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual

CARESCAPE Monitor B650
WARNING The use of accessories, transducers and cables other than those specified
may result in increased emissions or decreased immunity performance of
the equipment or system.
WARNING For detailed instructions and information regarding supplies and
accessories, always refer to their own instructions for use.

5.3 Network infrastructure

Ensure that the applicable network infrastructure is in place prior to the installation of the
patient monitor.
Acquire the network configuration information from the hospital IT or the related project
documentation and installation files.
5.3.1 MC Network
• The MC Network infrastructure shall be installed according to the CARESCAPE Network
Configuration Guide.
• The installation site of the patient monitor shall have a wall jack and a network patch
cable for the MC Network.
• Refer to the sections
unit and bed name
configure the patient monitor to the MC Network.
5.3.2 Wireless MC Network
• The wireless MC Network infrastructure shall be installed according to the CARESCAPE
Wireless Network Configuration Guide.
• Ensure that the wireless coverage area is adequate for the installation.
• Refer to the sections
Configuring WLAN
information you need to have available to configure the patient monitor to the wireless
MC Network.
5.3.3 S/5 Network
• The S/5 Network shall be installed according to the S/5 Network Installation Guide. Refer
to the iCentral and iCentral Client Service Manual for iCentral installation instructions.
• The installation site of the patient monitor shall have a wall jack and a network patch
cable for the S/5 Network.
• Refer to the section
information you need to have available to configure the patient monitor to the wired S/5
Network.
5.3.4 S/5 Wireless Network
• The S/5 Wireless Network shall be installed according to the S/5 Network Installation
Guide. Refer to the iCentral and iCentral Client Service Manual for iCentral installation
instructions.
• Ensure that the wireless coverage area is adequate for the installation.
52
2081903-001
7.2.2. Selecting and configuring CARESCAPE Network
to see the configuration information you need to have available to
7.2.2. Selecting and configuring CARESCAPE
and 7.4. Setting unit and bed name
7.2.3. Selecting and configuring S/5 Network
and
Network, 7.2.4.
to see the configuration
to see the configuration
7.4. Setting