The following symbols appear in the software user interface
Respiration indicator. Indicates a breath is detected by the impedance
respiration algorithm.
BIS and Entropy sensor impedance check indicator (gray). Displays for
each sensor as the impedance check is in progress.
BIS and Entropy sensor impedance check error indicator (red). Indicates
the specified sensor failed the impedance check.
BIS and Entropy sensor impedance check passed indicator. Indicates the
specified sensor passed the impedance check.
Completed NIBP volume icon. Adjust the volume of the tone that sounds
when an NIBP measurement result is available.
Manual NIBP icon. Start a manual NIBP measurement.
Nellcor OxiMax SatSeconds indicator. Indicates the amount of time the
SpO
saturation is outside the limits before alarms are generated.
2
SpO
signal strength indicator. Indicates the signal strength, with three
2
asterisks indicating the strongest signal.
NMT Stimulus beep volume icon. Adjust the volume of the tone that
sounds when a stimulus pulse is generated.
Progress bar. Indicates the amount of time remaining until the next
automatic measurement.
System overview
37
2081903-001