GE HEALTHCARE CARESCAPE Monitor B650 Technical Manual page 105

Activating host software immediately
Before you start:
• Make sure the patient monitor is in a case reset / patient discharged state.
1. In the Host Software window, verify that the software you are activating is listed as
Inactive in Current Software State.
2. In Software License, if applicable, enter the Activation Code for the new software
version.
3. In Software Activation, select
4. In Erase Inactive Software After Activation, select:
No - to keep the currently active software version as inactive software after
the new software version is activated successfully. This option lets you
restore the patient monitor to the previous software version later.
Yes - to erase the currently active software version permanently after the
new software version is activated successfully.
5. Select Activate to start the host software activation.
6. Confirm activation by selecting Yes in the Host Software window that opens.
The patient monitor shows a screen saver that informs about the ongoing software
activation:
Immediately
.
Configuration
97
2081903-001