Configuration Files - ABB XIO-00 User Manual

Application
Liquid Coriolis Interface
Verify or add applications on the XIO
Complete these steps in PCCU Expert view. Click View on the PCCU32 menu and select Expert from the
drop-down list.
To verify the installed applications:
Figure 2-12: Adding applications on the XIO – Application/License management tab
2.3.3

Configuration files

The configuration files contain the configuration or settings required for the operation of the XIO and
applications. Configuration files can include initial (factory-defined) or user-defined settings or
parameters. The XIO contains the following configuration files:
–
Factory configuration is the ABB default factory configuration, or a customer-specific configuration
programmed into the factory folder during final assembly. The factory configuration is read-only and
stored in persistent memory. It can only be updated at the factory.
–
Startup (cold) configuration is used for a cold restart of the device or when a configuration package is
sent to the device by the PCCU loader. The startup configuration is stored in the tfCold directory and
can be modified or updated as needed.
–
Running (warm) configuration is used by the device during normal operation. The running
configuration is stored in the tfData directory and can be modified or updated as needed.
Exportable
Multiple instances
Application
XIO Interface
XMV Interface
XIO USER MANUAL | 21064 24MNAB | 25
Exportable
Multiple instances
Multiple instances