Master Configuration; Overview; Configuring The System; Modbus Register Maps - ABB FSCA-01 Manual

Modbus protocol, rs-485 adapter module

Hide thumbs Also See for FSCA-01:

Table of Contents

Master configuration

This chapter gives information on configuring the Modbus/RTU

master for communication through the FSCA-01 RS-485 Adapter

Module.

After the adapter module has been mechanically and electrically

installed according to the instructions in the FSCA-01 RS-485

Adapter Module Hardware Manual (3AUA0000044521 Rev A

[English]) and has been initialized by the drive, the master must be

prepared for communication with the module.

Please refer to the master documentation for information on

configuring the system for communication with the adapter

module.

The PROFILE configuration parameter selects the Modbus

master. For more information on the parameter, see chapter

configuration.

For the Modbus register map definitions, see chapter

Communication.

For the definitions of Control Word, Status Word, References and

Actual values for a given communication profile, see chapter

Communication

profiles.

Drive

Master configuration

Table of Contents

Show Quick Links

Table of Contents