Figure 2-3. Hazardous Substances
(Parts)
(Metal Parts)
(
Circuit Modules)
(
Cables & Cable Assemblies)
(Plastic and Polymeric parts)
Pre-Installation Site Requirements
Before installing any T1100 AS hardware system, ensure that the requirements
described in both of the following sections have been met.
• "Generic Site Requirements" on page 2-6
• "Grounding and Power Requirements" on page 2-8
Generic Site Requirements
Ensure that the site where the product will be installed conforms to the
specifications listed in the following sections. These specifications are standard
telephony industry requirements for equipment installation.
Fire Protection
Local fire protection codes must be satisfied in the equipment room where the
system is to be located.
2-6
Preliminary
Indicates that the concentration of the hazardous substance in all homogeneous materials in the
parts is below the relevant threshold of the SJ/T 11363-2006 standard.
Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.
Safety and Pre-Installation Requirements
(Hazardous Substance)
910-2969-001 Revision H, February 2007