Table of Contents
Advertisement
Introduction
This chapter presents:
• General safety considerations that should always be kept in mind when
Tekelec products are installed or replaced
• Listing of regulatory compliances and certifications that Tekelec products
support
• Site requirements that should exist before Tekelec products are installed
Safety Information
Safety icons and text are used throughout Tekelec manuals to warn the reader of
the potential of personal injury, service interruption, and equipment damage. For
information about what each of the icons mean, see "Documentation
Admonishments" on page 1-6.
Before beginning any procedure described in this manual, ensure that you are
familiar with each of the following safety admonishments. Additional safety
admonishments may be included, or repeated, for specific procedures.
TOPPLE: Always read and understand instructions completely before
working on, moving, raising or lowering the frame, any portion of the frame, or
attachments to the frame or equipment.
topple
TOPPLE: Never try to unpack any frame from the shipping container without
at least two people to steady any movement of the frame and related
components. At least two people are required to safely move and position any
topple
frame.
TOPPLE: Never pull out the shelf of any frame that is not anchored properly.
Some frames are required to be attached to overhead ladder racks before
shelves are extended.
topple
DANGER: No commercially AC powered equipment may be used or placed
within 7 ft. of –48V equipment. AC powered equipment within 7 ft. of –48V
equipment may create a shock or current loop that can be severely hazardous to
personnel and equipment.
2-2
Safety and Pre-Installation Requirements
Preliminary
910-2969-001 Revision H, February 2007
Advertisement
Table of Contents
