Figure 5-11. T1100 As Rear Detail; Figure 5-12. Frame Mounting Detail - Tekelec 1100 Hardware Manual

How to Install Hardware in an Existing Frame

Figure 5-11. T1100 AS Rear Detail

16.
From the front of the frame, press the round release buttons and slowly push
the T1100 AS into the frame while observing the cables to avoid binding or
stretching (see Figure 5-12).

Figure 5-12. Frame Mounting Detail

F r o n t
Inner slide member
The chassis retention brackets on the front of the T1100 AS will contact the
frame adapters when the chassis is positioned correctly in the frame.
17.
Secure the chassis with one #10-32 screw on each side in the chassis retention
brackets.
910-2969-001 Revision H, February 2007
Preliminary
Retention
bracket screws
Chassis retention
bracket
Rear frame
adapter bracket
Front slide
assembly bracket
Front frame
adapter bracket
Release button hole
Middle slide member
Slide bearings
03_ts_front_bracketdetail
5-13