Table of Contents
Advertisement
Field Replaceable Units
Figure 7-3. Right Slide Assembly Mounting and Retention Bracket
F r o n t
Inner slide member
5.
Push the T1100 AS chassis toward the frame. When the buttons encounter the
middle slide members, simultaneously press the release buttons on the inner
slide members on both the left and right sides.
NOTE: The inner slide members will continue to travel until the release
buttons pop into the round holes of the middle slide members.
6.
At the rear of the frame, do one of the following:
• For Side Cable Management Arm Systems attach the side cable
management arms to the rear of the frame above the rails using the bolts
provided (see Figure 5-9 on page 5-11).
910-2969-001 Revision H, February 2007
DRAFT
Retention
bracket screws
Chassis retention
bracket
Rear frame
adapter bracket
Front slide
assembly bracket
Front frame
adapter bracket
Release button hole
Middle slide member
Slide bearings
03_ts_front_bracketdetail
7-17
Advertisement
Table of Contents
