Table C-2. Ip Address For The Sync Network; Table C-3. Eagle 5 Iss Ip Addresses - Tekelec 1100 Hardware Manual

ELAP or EPAP Network Integration
The same network address range selected for the MPS interfaces must be used
when configuring the DSM cards within the EAGLE 5 ISS. Table C-2 depicts the IP
address allocation for the Sync Network.
Table C-2.
IP Range
zzz.zzz.zzz.100
zzz.zzz.zzz.101
zzz.zzz.zzz.102
zzz.zzz.zzz.201
zzz.zzz.zzz.202
zzz.zzz.zzz.200
The Dialup Point-to-Point Protocol (PPP) Network allows multiple user interface
sessions to be established to the ELAP or EPAP from a remote workstation.
The MPS servers are configured for the use of a modem on port a001 on the serial
expansion board. The modem connection supports PPP (TCP/IP). With this
capability, multiple networked applications can be run across the PPP link at the
same time. The remote dial-in serial port configuration is described in "Modems"
on page C-11.
PPP requires two IP addresses to be registered, one to the serial port on the server,
and one to the client dialing into the server. These IP addresses are allocated on
the Sync network, and will be different for each system.
If the IP address of the Sync network is changed using the ELAP or EPAP user
interface menu item, the PPP IP addresses will be updated by the user interface
operation at the same time.
Table C-4 depicts valid sample IP addresses as an example. This example shows
three DSM cards in the EAGLE 5 ISS.
Table C-3.
IP Range
192.168.2.100
192.168.2.101
192.168.2.102
192.168.2.201
192.168.2.202
910-2969-001 Revision H, February 2007
Preliminary
IP Address for the Sync Network
Function
MPS Server A Ethernet IP Address
MPS Server A PPP Modem Address
MPS Server A PPP Dial-up Address
MPS Server B PPP Modem Address
MPS Server B PPP Dial-up Address
MPS Server B Ethernet IP Address
EAGLE 5 ISS IP Addresses
Function
MPS Server A Sync IP Address
MPS Server A PPP Modem Address
MPS Server A PPP Dial-up Address
MPS Server B PPP Modem Address
MPS Server B PPP Dial-up Address
C-5