Table of Contents
Advertisement
Introduction
This appendix provides additional information about T1100 AS base
configuration hardware features. The specific application loaded on the hardware
might require alterations to the base configuration. For an overview of T1100 AS
hardware features, see Chapter 3, "T1100 AS Hardware System Overview."
Hardware Components
The Tekelec 1100 AS platform offers the following standard hardware
components:
• Dual 3.2 GHz 32/64-bit processors
• Redundant hot swappable power modules (AC or DC available)
• Redundant BIOS architecture
• 800 megahertz (MHz) processor front side bus speed
• Up to 16 GB RAM
• Out-of-Band Management Card (OOBM) w/integrated Modem
NOTE: Use a minimum of 26 AWG telecommunications line cord for
connection to the modem.
• Light Emitting Diode (LED) diagnostic display
• Battery-backed real-time clock
• Hardware monitors that read and report:
— Supply, battery, and core voltages
— Fan speed inputs
— Ambient and processor temperatures
• E1/T1 composite clock signal distribution
• Eight PCI Card Slots (six available - use Tekelec approved cards only)
• Four Integrated 10/100/1000 Base T ports
• Five Serial Ports (RJ45)
• Two warm-swappable SATA drives
• Two CD-RW/DVD-RW for internally supporting persistent storage
• NEBS Compliant
In addition, the Tekelec 1100 AS platform has a variety of internal and external
interfaces, as described in "Interfaces" on page A-3.
A-2
T1100 AS Hardware Feature Information
Preliminary
910-2969-001 Revision H, February 2007
Advertisement
Table of Contents
