How To Replace Hard Disk Drive Assemblies - Tekelec 1100 Hardware Manual

9.
If requested, return the failed fan assembly to Tekelec. Arrange the return
shipment by using the procedures in "How to Arrange Return Shipping" on
page B-19.
10.
This procedure is complete.

How to Replace Hard Disk Drive Assemblies

Use the procedure in this section for either of the following purposes:
• To replace a failed hard disk drive
• To remove both hard disk drive assemblies from a failed T1100 AS chassis and
place them in a replacement T1100 AS chassis
SHOW ME: To view a video (with sound) that shows some steps of the
following procedure,
and data, be sure to read all the steps in the following procedure. For more
information about how to view this video, see "Programs Needed to View
Linked Documents" on page 1-4.
Procedure 7-9.
1.
Do one of the following:
• If this procedure is being performed to move hard disk drive assemblies
from a failed T1100 AS chassis to the replacement T1100 AS chassis, skip to
the next step.
• If this procedure is being performed to replace a failed hard disk drive,
ensure that the following have been done:
— An RMA has been obtained (see Procedure B-1, "Obtaining an RMA,"
—A spare hard disk drive assembly is available. Ensure that the contents
7-26
Preliminary
click here. For personnel safety and to protect equipment
Replace a Hard Disk Drive Assembly
on page B-2); for information about part number information to be
supplied, see "Hard Disk Drive Assembly Part Number Information"
on page B-9.
in the shipping container are complete; notify the project manager or
the Customer Care Center of any discrepancies. In particular, verify
that the contents include:
– A part number label on the replacement hard disk drive assembly
– "A" and "B" labels to be attached to the replacement hard disk
drive assembly (see step 8 on page 7-29)
– A label to attach to the base unit/hard disk label at the front of the
left side of the T1100 AS chassis (see step 13 on page 7-31)
Field Replaceable Units
910-2969-001 Revision H, February 2007