Table of Contents
Advertisement
15.
Refer to applications documentation to determine additional required steps.
16.
This procedure is complete.
How to Replace Removable Media Disk Drives (CD/DVD)
Use the procedure in this section to replace the assembly that contains two
removable media disk drives (also called CD/DVD drives). This assembly is
located on the left side of the chassis beneath the front top cover.
SHOW ME: To view a video (with sound) that shows some steps of the
following procedure,
and data, be sure to read all the steps in the following procedure. For more
information about how to view this video, see "Programs Needed to View
Linked Documents" on page 1-4.
Procedure 7-10. Replace a Removable Media Disk Drive Assembly
1.
Ensure that the following have been done:
• An RMA has been obtained (see Procedure B-1, "Obtaining an RMA," on
page B-2)
• A spare removable media disk drive assembly is available. Inspect the
replacement unit and its shipping container for indications of damage. If
damage is noted, contact the project manager or report damage to the
carrier. Ensure that the contents in the shipping container are complete;
notify the project manager or the Customer Care Center of any
discrepancies.
NOTE: T1100 AS removable media drives and adapter are considered one
FRU. Remove and replace the entire adapter assembly including both
removable media drives.
WARNING: This procedure CANNOT be performed while the T1100 AS
chassis is powered on. Never power OFF a T1100 AS chassis until the
application software and platform operating system (OS) are shut down. If
possible, use the procedures in the application manual for a "soft
shutdown." If the application interface is not operating or is not accessible,
a hard shutdown (turning OFF the breakers) is sometimes required. Contact
the Customer Care Center before doing a hard shutdown.
2.
Turn OFF the power switch on the T1100 AS chassis. Next, turn OFF the
circuit breakers or power distribution units that supply power to the T1100 AS
chassis containing the removable media disk drive assembly to be removed.
7-32
Preliminary
click
here. For personnel safety and to protect equipment
Field Replaceable Units
910-2969-001 Revision H, February 2007
Advertisement
Table of Contents
