Figure B-1. T1100 AS Chassis Front View
2.
From the front of the frame, using the handles on the front top cover or
knurled screws on the side of the chassis, pull forward until the release
buttons on the inner arms of the slide assemblies pop into the holes on each
side. Be careful to not disconnect, bind, or pinch any cables.
DANGER: If the T1100 AS chassis is pulled too far out after the release
buttons are disengaged, the inner slide members (attached to the chassis)
could come out of the middle slide members (attached to the frame).
3.
Using a Phillips screwdriver, loosen the screws on the T1100 AS chassis front
top cover until they are free. See Figure B-6 for locations.
B-4
Preliminary
910-2969-001 Revision H, February 2007
Hardware Repair and Return