Table of Contents
Advertisement
Procedure 4-1. How to Unpack Frame and Conduct Inventory...............4-2
Procedure 4-2. Mark Floor Layout ................................................................4-4
Procedure 4-3. Create Cable and Anchor Holes for Raised Floors ..........4-5
Procedure 4-4. Anchor a HD Frame into a Slab Floor................................4-7
Procedure 4-5. Anchor the Frame to the Slab Beneath the
Raised Floor ..............................................................................................4-11
Procedure 4-6. Anchor Frame to Raised Floor with
Support Channel ......................................................................................4-14
Procedure 4-7. Anchor Frame with Support Channel/Spring Nut .......4-16
Procedure 4-8. Attach Overhead Rack Support ........................................4-19
Procedure 5-1. Unpack a T1100 AS Chassis.................................................5-2
Procedure 5-2. Installing a T1100 AS Chassis..............................................5-4
Procedure 6-1. Prepare the Ground Cables .................................................6-4
Procedure 6-2. Connect Ground Cable: Frame to Ground Window........6-4
Procedure 6-3. Connect T1100 AS Chassis Ground:
T1100 AS Chassis to Frame.......................................................................6-7
Procedure 6-4. Connect Logic Ground from Logic Ground
Terminal Strip to Ground Window ........................................................6-9
Procedure 6-5. Connect Logic Ground: T1100 AS Logic
Ground Port to Logic Ground Terminal Strip ....................................6-11
Procedure 6-6. Connect Logic Ground Between Logic Ground Ports ...6-12
Procedure 6-7. Verify AC ground ...............................................................6-13
Procedure 6-8. Power Up T1100 AS Unit in an AC Environment..........6-16
Procedure 7-1. Replace an Ethernet Switch, Hub, or Console Server......7-7
Procedure 7-2. Slide T1100 AS Chassis Out from Frame .........................7-10
Procedure 7-3. Slide T1100 AS Chassis Back into Frame .........................7-11
Procedure 7-4. Remove a T1100 AS Chassis from Frame ........................7-12
Procedure 7-5. Return a T1100 AS Chassis to the Frame .........................7-16
Procedure 7-6. Replace Rectangular and Square Air Filters ...................7-20
Procedure 7-7. Replace a Rectangular Fan Assembly ..............................7-21
Procedure 7-8. Replace a Square Fan Assembly .......................................7-23
Procedure 7-9. Replace a Hard Disk Drive Assembly..............................7-26
Procedure 7-10. Replace a Removable Media Disk Drive Assembly.....7-32
910-2969-001 Revision H, February 2007
— DRAFT —
List of Procedures
ix
Advertisement
Table of Contents
