Table of Contents
Advertisement
Hardware Repair and Return
How to Locate T1100 AS Part Numbers
Each T1100 AS FRU (except for air filters) has labels that contain the following
information that may be needed for the RMA:
• Part number (to identify the type of FRU)
• Serial number (to provide more information about the specific FRU)
• CLEI (Common Language Equipment Identifier, a label that identifies the
manufacturer and the part)
In addition to part numbers on each FRU, the T1100 AS chassis has several labels
that contain part number information for FRUs that are internal to the chassis.
These labels allow part number information to be gathered without needing to
open the chassis.
Air Filter Part Number Information
Air filters do not have labels to identify the part numbers. To order replacement
air filters, contact a sales representative.
Fan Assembly Part Number Information
The part number information for fan assemblies is located only on the labels on
the fan assemblies. Procedure B-2 on page B-3 provides instructions about how to
access these labels.
Procedure B-2. How to Locate serial numbers for Fan Assembly
WARNING:
frame when working on electronic components.
1.
From the front of the frame, remove the # 12-24 Phillips screw from each
chassis retention bracket (see Figure B-1). Do not remove the screws in the
frame adapter brackets.
910-2969-001 Revision H, February 2007
Preliminary
Always wear an ESD wrist strap grounded to the bench or
B-3
Advertisement
Table of Contents
