Figure B-6. T1100 AS Front Top Cover screws
4.
Lift the cover off of the chassis.
5.
Figure B-7 shows the location of the removable media disk drive assembly
part label.
Figure B-7. CD/DVD label location
6.
Close the chassis front top cover.
7.
Tighten the screws to secure the front top cover.
8.
From the front of the frame, simultaneously press the round release buttons
and slowly push the chassis into the frame while observing the cables to avoid
binding or stretching.
NOTE: When the chassis stops moving, the front of the T1100 AS should
be slightly recessed to allow clearance behind the frame door when closed.
B-8
Preliminary
910-2969-001 Revision H, February 2007
Hardware Repair and Return