Ethernet Switches Or Hubs; Console Servers; Figure 3-9. Front And Rear Of Ac Power Distribution Unit - Tekelec 1100 Hardware Manual

Figure 3-9. Front and rear of AC power distribution unit

Circuit breaker A
Outlets 1-4
Circuit breaker B
Outlets 5-8

Ethernet Switches or Hubs

Ethernet switches or hubs cross-connect all the components in a heavy duty
frame. To determine which type of Ethernet switch or hub is used, see the
assembly
refer to the documentation that was delivered with the product.

Console Servers

Some T1100 AS hardware systems contain a console server, which provides access
to the console ports of the T1100 AS units and allows Tekelec Customer Care
Center to access remotely the T1100 AS units. A console server is used only
during maintenance and failure conditions. The T1100 AS OOBM card (see "Out
of Band Management Card" on page A-4) provides functions similar to a console
server. To determine whether a console server is used, see the
For more information about the console server hardware, refer to the
documentation that was delivered with the product. For information about how
to configure the console server, contact Customer Care Center (see "Customer
Assistance" on page 1-7).
3-14
Preliminary
drawing. For more information about the Ethernet switches or hubs,
T1100 AS Hardware System Overview
Front view
Rear View
910-2969-001 Revision H, February 2007
assembly drawing.