T1100 AS Hardware System Overview
Preliminary
Figure 3-6. T1100 AS with Side Cable Management Arms
Breaker Panel
Breaker panels are used to provide redundant power paths to T1100 AS units and
other equipment in a heavy duty frame in a DC environment.
Figure 3-7 shows a breaker panel.
The breaker panel has two sides: side A and side B. Each side has twelve breakers,
although only certain breakers on each side are active (closed). The open position
of each breaker is marked by "O" and "|" marks the closed position.
Figure 3-7. Front of Breaker Panel
3-10
910-2969-001 Revision H, February 2007