Table of Contents
Advertisement
T1100 AS Hardware Feature Information
Interfaces
The Tekelec 1100 AS platform includes interfaces for accommodating expansion,
control and configuration, network connectivity, and peripheral support.
• Table A-1shows the basic interfaces supplied to all implementations that use
the T1100 AS platform.
• Table A-2 on page A-3 shows additional interface types that can be added,
using PCI cards, depending on product application.
Table A-1.
Interface
PCI Slots
Serial
interfaces
USB ports
External
timing
interface
Ethernet
Table A-2.
Interface
Ethernet
Serial
910-2969-001 Revision H, February 2007
Preliminary
Basic Interfaces
Description
Eight Peripheral Computing Interface (PCI) expansion slots can
accommodate Tekelec-designed or commercial-off-the-shelf
(COTS) expansion modules (seven available).
A standard RS-232D serial interface is usually used for connecting
to other equipment.
Additional serial interfaces can be added optionally (see Table A-2).
Two Universal Serial Bus (USB) ports to support direct connectivity
to peripherals. The USB ports are accessible from the rear.
External timing interface for synchronizing operations with
network timing standards, as required for specific configurations.
This timing interface may be implemented on Signaling Link
modules as applicable.
The Tekelec 1100 AS has four Ethernet ports of 10Mbps, 100Mbps,
or 1Gb operation as needed for specific product configurations.
Optional Interfaces (on PCI Cards)
Description
The Tekelec 1100 AS platform can support Ethernet ports of
10Mbps, 100Mbps, or 1Gb operation as needed for specific
product configurations. Each PCI slot can support a qualified
Ethernet card that can support two Ethernet ports (although it is
not typical that all PCI slots contain Ethernet cards).
PCI cards that supply additional serial interfaces can be added
to the T1100 AS platform. These serial interfaces are used to
connect to other servers located in the same frame.
A-3
Advertisement
Table of Contents
