T1100 As Status Indicators; Figure 3-4. Rear I/O Panel - Tekelec 1100 Hardware Manual

T1100 AS Hardware System Overview
• The I/O connectors on the rear edge of the main board (serial port, E1 or T1
clock inputs, and two USB ports)
• The power board I/O (logic ground connection)
• Five Serial ports
Power entry is at the rear of the Tekelec 1100 AS. There are two power supply
modules. The A and B power supply modules are hot-swappable.
Logic ground is carried on a connector on the power board. The connector is
bulkhead-mounted to the rear I/O panel. There are also two chassis ground
connector studs on the rear I/O panel. See Figure 3-4 for a detailed view of the
rear I/O panel.
NOTE: Figure 3-4 shows T1100 AS base configuration with empty PCI slots

Figure 3-4. Rear I/O Panel

T1100 AS Status Indicators

The T1100 AS platform provides the following light-emitting diode (LED) status
indicators on the front fascia of the Tekelec 1100 AS platform (see Figure 3-5):
• Critical, Major, and Minor visual alarm indicators indicate operational
condition of the Tekelec 1100 AS platform, including status of the major
subsystems: processors, volatile memory, non-volatile memory (disk drives,
etc.), and interfaces.
• Indicators for A and B power inputs.
910-2969-001 Revision H, February 2007
Preliminary
3-7