Figure B-14. T1100 As Chassis Front View - Tekelec 1100 Hardware Manual

Hardware Repair and Return
Procedure B-5. How to Locate serial numbers for PCI Cards
1.
Request that the Customer Care Center assist you in determining the which
slot (1 through 8) contains the PCI card that needs to be replaced.
2.
Determine whether the required PCI slot area of the PCI slots label on the rear
of the left side of the T1100 AS chassis can be viewed from the side of the
frame without sliding the chassis out from the frame. See Figure B-12 for the
placement of the label on the chassis and Figure B-13 for the location of each
PCI slot information on the label.
3.
If the necessary PCI slot area of the PCI slots label shown in Figure B-12 can be
viewed, report the requested information from the label, and skip to step 7.
Otherwise, perform the remaining steps.
WARNING:
frame when working on electronic components.
4.
From the front of the frame, remove the # 12-24 Phillips screw from each
chassis retention bracket (see Figure B-1). Do not remove the screws in the
frame adapter brackets.

Figure B-14. T1100 AS Chassis Front View

910-2969-001 Revision H, February 2007
Preliminary
Always wear an ESD wrist strap grounded to the bench or
B-13