Figure 28: Rear I/O Panel; Figure 29: T1100 As Status Indicators - Tekelec 1100 Hardware Manual

T1100 AS Hardware System Overview
Logic ground is carried on a connector on the power board. The connector is bulkhead-mounted
to the rear I/O panel. There are also two chassis ground connector studs on the rear I/O panel.
See

Figure 28: Rear I/O Panel

Note: Figure 28: Rear I/O Panel
slots
Figure 28: Rear I/O Panel
T1100 AS Status Indicators
TheT1100 AS platform provides the following light-emitting diode (LED) status indicators on the
front fascia of the Tekelec 1100 AS platform (see
Critical, Major, and Minor visual alarm indicators indicate operational condition of the Tekelec
1100 AS platform, including status of the major subsystems: processors, volatile memory,
non-volatile memory (disk drives, etc.), and interfaces.
Indicators for A and B power inputs.

Figure 29: T1100 AS Status Indicators

For more information about the diagnostics that manage these alarm and status indicators, see
T1100 AS Diagnostics
44
on page 44 for a detailed view of the rear I/O panel.
on page 44 showsT1100 AS base configuration with empty PCI
on page 142.
Figure 29: T1100 AS Status Indicators
910-2969-001 Revision K, June 2009
Hardware Manual
on page 44):