Displaying And Maintaining An Irf Fabric; Configuration Examples; Lacp Mad-Enabled Irf Configuration Example (Using Crosslink Ports) - HPE 6127XLG Irf Configuration Manual

After the IRF fabric is recovered, all ports that have been shut down by MAD come up automatically.

Displaying and maintaining an IRF fabric

Execute display commands in any view.
Task
Display information about all IRF
members.
Display the IRF fabric topology.
Display IRF link information.
Display IRF configuration.
Display the load sharing mode for
IRF links.
Display MAD configuration.

Configuration examples

This section provides IRF configuration examples for IRF fabrics that use different MAD
mechanisms.
LACP MAD-enabled IRF configuration example (using
crosslink ports)
Network requirements
As shown in
aggregation to Device E, an HPE device that supports extended LACP.
Figure 16 Network diagram
FGE1/1/1
Device A
Command
display irf
display irf topology
display irf link
display irf configuration
display irf-port load-sharing mode [ irf-port
[ member-id/port-number ] ]
display mad [ verbose ]
Figure 16, set up a two-member IRF fabric. Configure LACP MAD on the multi-member
Device E
FGE1/0/1 FGE1/0/2
IRF
(IRF-port2/2)
XGE2/0/17-XGE2/0/20
XGE1/0/17-XGE1/0/20
(IRF-port1/1)
FGE2/1/1
Device B
30