System Construction; System Configuration Overview (Delivery Accessories); System Configuration 1 (Delivery Accessories) - Canon iR C2880 Series Service Manual
1.1.1 System Configuration Overview (Delivery Accessories)
iR C3380i / iR C3380 / iR C2880i / iR C2880
The delivery accessories for the machine can be divided into three patterns in accordance with the available functions.
- In case a large amount of delivery processing or a several types of delivery processing (e.g., staple, punch) are necessary: system configuration 1 for the delivery
accessories.
- In case some delivery processing (e.g., staple) is necessary: system configuration 2 for the delivery accessories.
- In case some delivery processing (e.g., three-system sorting) is necessary: system configuration 3 for the delivery accessories.
The configuration is shown in the next section.
1.1.2 System Configuration 1 (Delivery Accessories)
iR C3380i / iR C3380 / iR C2880i / iR C2880
The system configuration is shown below.
[1]
Finisher-Y1
[2]
Saddle Finisher-Y2
[3]
Puncher Unit-L1/M1/N1/P1
[4]
Buffer Path Unit-E2
[5]
Optional Power Supply-R1 [120V/230V as standard
equipments]
(It is needed when mounting [1] to [3].)
[5]
[1]
[3a]
[1a]
[2a]
[2]
[4]
[3]
F-1-1
[1a]
Installation Procedure
- Mounting the Finisher-Y1.
- Mounting the Buffer Path Unit [4].
[2a]
Installation Procedure
- Mounting the Finisher-Y2.
- Mounting the Buffer Path Unit [4].
[3a]
Installation Procedure
- Mounting the Puncher Unit-L1/M1/N1/P1
[4a]
Instruction's sheet of corresponding Installation Procedure
For instructions on installation, see the Installation Procedure if the