Decommissioning; Environmental Information - ABB IRB 140 Product Manual

6 Decommissioning

6.1 Environmental information

Hazardous material
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly to prevent health or environmental hazards.
Material
Batteries, NiCad or Lithium
Copper
Cast iron/nodular iron
Steel
Neodymium
Plastic/rubber
Oil, grease
Aluminium
Oil and grease
Where possible, arrange for oil and grease to be recycled. Dispose of via an
authorized person/contractor in accordance with local regulations. Do not dispose
of oil and grease near lakes, ponds, ditches, down drains, or onto soil. Incineration
must be carried out under controlled conditions in accordance with local regulations.
Also note that:
3HAC027400-001 Revision: K
• Spills can form a film on water surfaces causing damage to organisms.
Oxygen transfer could also be impaired.
• Spillage can penetrate the soil causing ground water contamination.
© Copyright 2004-2013 ABB. All rights reserved.
6 Decommissioning
6.1 Environmental information
Example application
Serial measurement board
Cables, motors
Base, lower arm, upper arm
Gears, screws, base frame, and so on.
Brakes, motors
Cables, connectors, drive belts, and so on.
Gearboxes
Covers, synchronization brackets
203