4 Repair
4.3.1 Replacement of cable harness
Continued
12
13
14
15
16
17
Continues on next page
106
Action
Disconnect the connectors inside
the lower arm.
Pull the cables out of the upper
arm.
Remove the cover, console.
Disconnect the connectors inside
the console and undo the cable
holders.
Gently pull the cabling from the
base up through the console.
Gently pull the cabling out of the
lower arm.
© Copyright 2004-2013 ABB. All rights reserved.
Note/Illustration
xx0200000449
•
G: Connectors R3.MP3 and R3.FB3
Detailed in section
Replacement of cover, console
on page
141.
Connectors:
•
R3.MP1
•
R3.MP2
•
R3.FB1
•
R3.FB2
3HAC027400-001 Revision: K