Cp2108 Usb Uart Interface - Xilinx ZCU106 User Manual

CP2108 USB UART Interface

[Figure 2-1, callout 13]
The CP2108 quad USB-UART on the ZCU106 board provides four level-shifted UART
connections through single micro-B USB connector J83. Channel 0 and 1 are PS-side MIO
connections described in the
and Channel 3 is connected to MSP430 system controller U41. The USB UART interface
circuit is shown in
Labs website [Ref
X-Ref Target - Figure 3-14
ZCU106 Board User Guide
UG1244 (v1.0) March 28, 2018
UART0 (MIO 18-19)
Figure 3-14. The Silicon Labs CP2108 data sheet is available on the Silicon
19].
Figure 3-14: USB UART Interface
www.xilinx.com
Chapter 3: Board Component Descriptions
section. Channel 2 is a PL-side connection
Send Feedback
X16529-050117
57