Xilinx ZCU106 User Manual page 120

Program_B Pushbutton
[Figure 2-1, callout 31]
PS_PROG_B pushbutton switch SW5 grounds the XCZU7EV MPSoC PS_PROG_B pin T24
when pressed (see
which can then be acted on by the PS software. See the Zynq UltraScale+ MPSoC Technical
Reference Manual (UG1085)
configuration.
X-Ref Target - Figure 3-46
ZCU106 Board User Guide
UG1244 (v1.0) March 28, 2018
Figure 3-46). This action clears the programmable logic configuration,
[Ref 2] for information about Zynq UltraScale+ MPSoC
Figure 3-46: PS_PROG_B Pushbutton Switch SW5
www.xilinx.com
Chapter 3: Board Component Descriptions
Send Feedback
X16549-052417
120