Ft4232Hl Usb Uart Interface (Mio 18-21) - Xilinx ZCU104 User Manual

FT4232HL USB UART Interface (MIO 18-21)

[Figure 2-1, callout 7]
The FT4232HL U151 quad USB-UART on the ZCU104 board provides three level-shifted
UART connections through the single micro-AB USB connector J164.
• Channel A is configured to support the JTAG chain.
• Channel B implements UART0 MIO18/19 connections.
• Channel C implements UART1 MIO20/21 connections.
• Channel D implements UART2 PL-side bank 28 4-wire interface.
The USB UART interface circuit is shown in
available on the Silicon Labs website
X-Ref Target - Figure 3-13
ZCU104 Board User Guide
UG1267 (v1.1) October 9, 2018
Figure
[Ref 15].
Figure 3-13: Quad USB UART Interface
www.xilinx.com
Chapter 3: Board Component Descriptions
3-13. The FTDI FT4232HL data sheet is
Send Feedback
X20273-020518
52