C
H A P T E R
This chapter describes some commands in more detail.
33.1 Overview
These are commands that you may use frequently in maintaining your switch.
33.2 show Commands
These are the commonly used
33.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Figure 127 show system-information Command Example
sysname> show system-information
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
sysname>
GS-3012/GS-3012F User's Guide
Command Examples
commands.
show
: GS-3012
:
:
: 00:a0:c5:da:d3:17
: V3.70(LR.0)b4 | 10/13/2006
: 2453896
:
0:01:03 (18db ticks)
: V0.6 | 03/02/2004
: RAS Oct 13 2006 09:58:56
: GS-3012
33
239