31.1 Overview
These are commands that you may use frequently in maintaining your switch.
31.2 show Commands
These are the commonly used
31.2.1
show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
ras> show system-information
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
31.2.2
show hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Command Examples
commands.
show
: GS-3012
:
:
: 00:13:49:00:00:02
: V3.60(LR.1)b0 | 11/11/2005
: 3027468
:
4:44:50 (1a13da ticks)
: V3.00 | 01/14/2005
: RAS Sep 27 2005 17:59:19
: GS-3012
Figure 31-1 show system-information Command Example
Command Examples
This chapter describes some commands in more detail.
GS-3012/GS-3012F User's Guide
Chapter 31
31-1