29.1 Overview
These are commands that you may use frequently in maintaining your switch.
29.2 show Commands
These are the commonly used
29.2.1
show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and system up time).
An example is shown next.
System Name
System Contact
System Location :
Ethernet Address: 00:13:49:11:22:34
ZyNOS F/W Version: V3.60(HO.0)b1 | 01/21/2005
RomRasSize
System up Time
Bootbase Version: V3.00 | 01/14/2005
ZyNOS CODE
Product Model
GS-3012>
29.2.2
show hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
Command Examples
commands.
show
: GS-3012
:
: 2891036
:
0:56:32 (52d1d ticks)
: RAS Jan 21 2005 21:40:05
: GS-3012
Figure 29-1 show system-information Command Example
Dimension GS-3012 Gigabit Ethernet Switch
Command Examples
This chapter describes some commands in more detail.
Chapter 29
29-1